• Advanced Spray-On, Rinse-Off Formula – Quick and safe ceramic application
• Durable Weather-Resistant Barrier – Protects for up to 6 months
• Rapid Water Beading – Strong hydrophobic properties on all surfaces
• Deep, Glossy Finish – Instantly enhances shine and depth
• Thick Foam Application – Reduces contact and marring risk
• Safe for All Exterior Surfaces – Use on paint, glass, trim, wheels & more
• Perfect for Maintaining Ceramic Coatings – Boosts or refreshes protection

Ensure the vehicle is thoroughly cleaned prior to application. Ensure the surfaces are cool to the touch and out of direct sunlight. Apply when wet – no need to dry your vehicle before application.

The amount of product required will depend on the size of your vehicle. Dilute 1:4 in a foaming lance bottle or Dual Action Spray Bottle .

• For smaller vehicles dilute 100ml of Foam & Seal : 400ml water.
• For bigger vehicles 200ml of Foam & Seal : 800ml of water.

1. Apply a blanket of foam to one section of the vehicle. No cure time or agitation is required.
3. Immediately rinse thoroughly using a pressure washer.
4. Dry the vehicle with a clean drying towel, removing all residue.
5. Clean the windscreen and wiper blades with dedicated glass cleaner.

WARNING: Rinse foaming lance and bottle out thoroughly with water after use. Avoid application to the windscreen. Do not apply in direct sunlight. Do not allow the product to dry onto any surface. Do not store the diluted product, use freshly mixed. Not suitable for convertible vehicles or motorcycles. Not suitable for use on wrapped or matte finished paintwork. 

STORAGE: Protect from frost. Do not allow product to freeze. Store product in ambient temperatures above 6 Degrees C and below 25 Degrees C. Exposure to severe temperatures will cause irreversible damage to the product.