• Apply at the wash stage
• Si02 based formula
• Superior water beading
• Safe on all exterior gloss surfaces
• Up to 3 months protection

1. Dry surface: simply spray directly onto the surface and spread with a soft cloth, then buff as required.
2. Wet surface: after washing the vehicle, while the surface is still wet, simply spray the product onto the wet surface and rinse off with a pressure washer immediately. You can then dry the vehicle using a drying towel or microfibre cloth.This is especially important in areas with very hard water. Alternatively, a de-ionising water filter removes the need for drying off with a towel or microfibre cloth, to give protection through a completely touchless method.

Please note: We recommend applying it one panel at a time to prevent over-curing, which can lead to staining. Do not use on warm surfaces, in direct sunlight and do not allow to dry on surface, as staining may occur. Do not use on wrapped or matt surfaces.

Storage: Protect from frost. Do not allow product to freeze. Store product above 6C and bellow 25C degrees. Exposure to severe temperatures will cause irreversible damage to the product.